Démarreurs progressifs CD Automation

Nos démarreurs progressifs ont été conçus pour piloter des moteurs à courant altérnatif (à cage d’écureuil) à trois phases et trois fils, avec particulière attention à l’optimisation de la réduction de la consommation énergétique. La majorité des moteurs électriques utilisés dans le secteur industriel sont des moteurs triphasée à courant alternatif à courant et vitesse constantes,
et consomment les deux-tiers de l’énergie électrique de l’industrie.
Pas tout le monde sait que les coûts de la consommation d’un moteur representent le 96% des coûts de son cycle de vie.
Pour cette raison en utilisant les démarreurs progressifs de CD Automation on pourra avoir des impacts positifs sur l’économie d’énergie de l’installation.

I nostri soft starter sono stati progettati per pilotare motori in corrente alternata (a gabbia di scoiattolo) a tre fasi e tre fili, con particolare attenzione all'ottimizzazione per ridurre il consumo energetico - IMMAGINE DELLA FAMIGLIA SOFT STARTER DI CD AUTOMATION

Comment choisir les démarreurs progressifs à partir de sa propre application

  • Commencer en analysant le tableau des applications à droite (en bas en cas de visualisation via smartphone). Par exemple: agitateur 50A, le courant de démarrage conseillé est 4 fois la FLC (Courant à pleine charge 50A)
  • Successivement sélectionnez le modèle en consultant le tableau en bas de page.
  • Sur la colonne HEAVY (4) le courant nominale du moteur doit être égal ou inférieur à la valeur indiquée (dans l’exemple susmentionné doit être de 55A)
  • Si le modèle selectionné est l’STB, votre démarreur progressif aura le code STB075.
  • Si vous désirez recevoir le démarreur progressif déjà configuré considerez le code ci-dessous indiqué.

Guida di selezione dei Soft Starter

APPLICATION

3 In

3,5 In

4 In

4,5 In

AGITATOR

simbolo

ATOMIZER

simbolo

BANDSAW

simbolo

BOTTLE WASHER

simbolo

CENTRIFUGAL PUMP

simbolo

CENTRIFUGE

simbolo

CHIPPER

simbolo

CIRCULAR SAW

simbolo

CONVEYOR BELT

simbolo

CONVEYOR SCREW

simbolo

CRANE TRANSLATOR

simbolo

CRUSHER CONE

simbolo

CRUSHER JAW

simbolo

CRUSHER ROTARY

simbolo

CRUSHER VERTICAL IMPACT

simbolo

DEBARKER

simbolo

DRYER

simbolo

DUST COLLECTOR

simbolo

EDGER

simbolo

ELEVATOR

simbolo

FAN AXIAL CLAMPED

simbolo

FAN AXIAL UNCLAMPED

simbolo

FAN CENTRIFUGAL CLAMPED

simbolo

FAN CENTRIFUGAL UNDAMPED

simbolo

FAN HIGH PRESSURE

simbolo

GRINDER

simbolo

HYDRAULIC POWER PACK

simbolo

LOADED PISTON COMPRESSOR

simbolo

MILL

simbolo

MILL BALL

simbolo

MILL HAMMER

simbolo

MIL ROLLER

simbolo

MIXER

simbolo

MONORAILS

simbolo

PALLETISER

simbolo

PLANER

simbolo

POSITIVE DISPLACEMENT PUMP

simbolo

PRESS

simbolo

PUMPS BORE

simbolo

REPULPER

simbolo

ROLLER CONVERYOR

simbolo

ROTARY TABLE

simbolo

SANDER

simbolo

SCREW COMPRESSOR

simbolo

SCREW CONVEYOR

simbolo

SEPARATOR

simbolo

SHREDDER

simbolo

SLICER

simbolo

SLURRY PUMP

simbolo

TUMBLER

simbolo

UNLOADED PISTON COMPRESSOR

simbolo

HYDRAULIC PUMP

simbolo

SERVICE

LIGHT

MEDIUM

HEAVY

SEVERE

Start Current (Multliple of FLC*)

3

3,5

4

4,5

AC53b 3,0 -10:350<1000m

AC53b 3,5 -15:345<1000m

AC53b 4,0 -20:340<1000m

AC53b 4,5 -30:340<1000m

MODEL

Rating at 40° C for 3xFLC

Rating at 40° C Amps

Rating at 40° C Amps

Rating at 40° C Amps

STB

006

6A

5A

4A

3A

STB

012

12A

11A

9A

7A

STB

022

22A

20A

17A

13A

STB

032

32A

29A

25A

19A

STB – STO – STE

043

43A

40A

35A

29A

STB – STO – STE

050

50A

44A

38A

30A

STB – STO – STE

060

60A

55A

48A

37A

AC53b 3,0 -6:590<1000m

AC53b 3,5 -15:585<1000m

AC53b 4,0 -20:580<1000m

AC53b 4,5 -30:570<1000m

STB – STO – STE

075

75A

65A

55A

47A

STB – STO – STE

100

100A

88A

75A

61A

STB – STO – STE

140

140A

123A

107A

90A

STB – STO – STE

170

170A

145A

122A

97A

STB – STO – STE

200

200A

190A

160A

135A

  1. Cliquez-là pour voir le tableau comparatif de nos unités

    SOFT STARTERS MAIN FEATURES

    STB

    STO

    STE

    GENERAL

    Current range

    6:200A

    >32:200A

    >32:200A

    3 wire motor connection

    simbolo

    simbolo

    simbolo

    Internal bypass St. from 6 to 200A

    simbolo

    simbolo

    simbolo

    MAIN SUPPLY VOLTAGE

    Supply voltage 3x200V; 3x440V Max (+10 : -15%) ac

    simbolo

    simbolo

    simbolo

    Supply voltage 3x200V; 3x575V Max (+10 : -15%) (just for >32A)

    simbolo

    simbolo

    simbolo

    Auxiliary voltage 110-240V (+10 : -15%) ac (just for >32A)

    simbolo

    simbolo

    simbolo

    Auxiliary voltage 380-440V (+10 : -15%) ac (just for >32A)

    simbolo

    simbolo

    simbolo

    Auxiliary voltage 24V ac/dc (+20 : -20%) ac (just for >32A)

    simbolo

    simbolo

    simbolo

    Voltage frequency 45 to 66 Hz

    simbolo

    simbolo

    simbolo

    DIGITAL INPUTS

    Start/stop optoisolated input + 24V dc start with Dip 4 off (32A)

    simbolo

    Start with power up with Dip 4 on (32A)

    simbolo

    Start optoisolated input + 24V dc

    simbolo

    Stop optoisolated input + 24V dc

    simbolo

    Configurable digital input 1

    simbolo

    simbolo

    Configurable digital input 2

    simbolo

    simbolo

    CONTROL

    Ramp up 0 to 15 sec adjustable

    simbolo

    simbolo

    simbolo

    Ramp down 0 to 15 sec adjustable

    simbolo

    simbolo

    simbolo

    Initial torque 0 to 80%

    simbolo

    simbolo

    simbolo

    Current limit >32A

    simbolo

    simbolo

    Motor full load current >32A

    simbolo

    simbolo

    Overload relay >32A

    simbolo

    simbolo

    Digital in/out >32A

    simbolo

    simbolo

    Phase sequence enable >32A

    simbolo

    simbolo

    Exceded max start time >32A

    simbolo

    simbolo

    LED STATUS ALARM INDICATION

    Run green led slow blinking ready to start

    simbolo

    simbolo

    Run green led fast blinking ramp active

    simbolo

    simbolo

    Run green led on end of ramp

    simbolo

    simbolo

    Alarm red led off no alarm

    simbolo

    simbolo

    PW green on power supply available

    simbolo

    simbolo

    PW green on power supply not available

    simbolo

    simbolo

    KEYPAD

    Rotary switch

    simbolo

    simbolo

    Colour touch panel with alarm message in different language

    simbolo

    Read out of voltage, current, power etc

    simbolo

    Logging and trend

    simbolo

    COMMUNICATION

    Modbus RTU Std

    simbolo

    simbolo

    USB device Std

    simbolo

    simbolo

    Modbus TCP (option)

    simbolo

    simbolo

    Profibus DP (option)

    simbolo

    simbolo

    Profinet (option)

    simbolo

    simbolo

    Devicenet (option)

    simbolo

    simbolo

    ENVIRONMENTAL

    Protection IP20

    simbolo

    simbolo

    simbolo

    Current sizing as in TAB for 40°C for temperature over see derating

    simbolo

    simbolo

    simbolo

    Operating temperature -10 to 60°C max

    simbolo

    simbolo

    simbolo

    Humidity 5% to 95% relative humidity

    simbolo

    simbolo

    simbolo

    Conformal coating (option)

    simbolo

    simbolo

    simbolo

    RELAY OUTPUT

    2 Relay output free voltage contact (500mA, 125 Vac)

    simbolo (1)

    simbolo

    simbolo

    FUNCTIONALITY

    STB

    STO

    STE

    START / STOP

    Ramp up voltage

    simbolo

    simbolo

    simbolo

    Ramp up current

    simbolo

    simbolo

    Ramp down

    simbolo

    simbolo

    simbolo

    Stop by coasting

    simbolo

    simbolo

    simbolo

    CONTOL MODE

    Internal bypass relay up to 200A

    simbolo

    simbolo

    simbolo

    Current limit facility

    simbolo

    simbolo

    Torque control

    simbolo

    simbolo

    Constant current control

    simbolo

    simbolo

    kick start 80% 100 msec

    simbolo

    simbolo

    kick start 80% 200 msec

    simbolo

    simbolo

    kick start 80% 300 msec

    simbolo

    simbolo

    kick start 80% adjustable msec

    simbolo

    PROTECTION

    Start time out of limit

    simbolo

    simbolo

    simbolo

    Phase loss

    simbolo (1)

    simbolo

    simbolo

    Motor overload

    simbolo

    simbolo

    Phase sequence

    simbolo

    simbolo

    Unbalanced current

    simbolo

    simbolo

    Power circuit failure

    simbolo

    simbolo

    simbolo

    Thyristor in short circuit

    simbolo

    simbolo

    simbolo

    Supply frequency out of limits

    simbolo

    simbolo

    simbolo

    Istantaneous peak current

    simbolo

    simbolo

    Bypass overload

    simbolo

    simbolo

    Overvoltage

    simbolo

    simbolo

    simbolo

    Overcurrent

    simbolo

    simbolo

    Undercurrent protection (pump)

    simbolo

    simbolo

    Overtemperature on heatsink

    simbolo

    simbolo

    Overload relay and curve selection

    simbolo

    simbolo

    PTC motor termistor

    simbolo

    simbolo

    Communication failure

    simbolo

    simbolo

    Communication

    Modbus RTU Std

    simbolo

    simbolo

    Modbus TCP (option)

    simbolo

    simbolo

    Profibus DP (option)

    simbolo

    simbolo

    Profinet (option)

    simbolo

    simbolo

    USB device Std

    simbolo

    simbolo

    Devicenet (option)

    SOFTWARE APPLICATIONS

    Pump application

    simbolo

    simbolo

    simbolo

STB – Démarreur progressif basique

  • La famille STB possède des contrôles manuels pour ce qui concerne: - Tension initiale - Temps de démarrage de la rampe - Temps d'arrêt de la rampe
  • Le kickstart 100, 200 ou 300 msec peut être configuré parmi le DIP switch
  • Trous de montage DIN ou trous de fixation au mur: de 6 à 32A
  • Trous de fixation au mur de 42 à 200A

Copyright © 2010 - 2021 | Cd Automation S.r.l. - Via Pablo Picasso 34/36, Legnano, MI - Tel: +39 0331 577479 - Fax: +39 0331 579479 - PEC:[email protected] - PIVA:IT08925720156 - Tribunale di Milano REA:1255303 - Capitale sociale:€ 26.000,00 - All Rights Reserved.