• From 25 up to 700A
  • Max. voltage 480V or 600V AC as option
  • Load type: Resistance, Transformer
  • Inputs: SSR, 0:10V, 4:20mA, 10KPot and Communication Std.
  • Firing mode: Burst Firing, Delay Triggering + Burst Firing (DT)
  • N°1 Retransmission is available

General Details

REVO E 2PH Thyristor Power Controller

  • Thyristor Power Controller Units suitable for Normal Resistance, Medium lamp; Long Wave IR, and Silicon Carbide load types.
  • Two leg switching of three wire star or delta loads
  • Current range – 25A, 35A, 45A, 75A, 100A, 125A, 150A, 200A, 275A, 400A, 450A, 500A, 600A, 700A
  • Fully digital and user configurable for all inputs, firing modes, feedback modes and load types
  • Firing modes include zero crossing (ZC), burst firing (BF), delayed triggering (DT)
  • Microprocessor based electronic circuit fully isolated from power
  • Universal input signal with automatic zero/span calibration
  • Power or voltage feedback
  • RS485 Comms MODBUS protocol as standard
  • Unbalanced load
  • Heater break alarm as standard to diagnose partial or total load failure and short circuit
  • Control & monitor (power, current & voltage) via front panel keypad & display
  • IP20 protection, cUL us is available as an option.
Manuals

en

English

NameSizeDate
ENG L M CD CD3000E Serial-communication

456.0 KiB 4 June 2014
ENG L M CD CD3000E-2PH 25-700A

1.9 MiB 4 June 2014

Serial Communication CD3000E-REVOE

740.0 KiB 17 July 2015

it

Italiano

NameSizeDate
ITA L M CD CD3000E-2PH 25-700A

1.9 MiB 4 June 2014

de

Deutsch

NameSizeDate
GER L M CD CD3000E-3PH 25-500A

2.1 MiB 4 June 2014

fr

Français

NameSizeDate
FRA L M CD CD3000E-3PH 25-600A

4.3 MiB 13 July 2015

 

Datasheet
Software

ThyristorConfigurator V5.6.4.14

Thyristor configurator sofware
CD3000M
CD3200
Multidrive 1/2/3 PH,
CD3000E 2/3 PH,
REVO E 2/3PH,
REVO M 1/2/3 PH,
REVO CL
REVO PC RPC08 / RPC18 / RPC28 / RPC38 / RPC48

22.8 MiB 26 May 2016

Driver-USB-for-programming-cable

CCA Cable for unit configuration need a driver to be used on Windows PC. This is the executable version to install automatically the driver into the PC system.

2.0 MiB 6 May 2016

Driver-USB-for-programming-cable

CCA Cable for unit configuration need a driver to be used on Windows PC. This is the zipped version of ini file.

1.3 MiB 6 May 2016

TestModbus

CD3000M / CD3200 Software Testing Kit for Modbus communication. To connect the unit at the PC, it's necessary use the programming cable connected between the PG connector and the serial port RS232 of the PC. The programming cable is not included.

1.0 MiB 4 June 2014

Size & Dimensions
Informativa Privacy | Informativa Cookie | Impostazioni Cookie