- Home
- Old - Spare Products
- REVO M 1PH Thyristor Power Controller
REVO M 1PH
This Product is available only as SPARE PRODUCT |
Substitute it with→ REVO C 1PH |
- From 30 up to 700A
- Max. voltage 480V or 600V AC as option
- (690V available on units > 280A)
- Load type: Resistance, IR Lamp short waveform and SiC element.
- Inputs: SSR, 0:10V, 4:20mA, 10KPot and Communication Std.
- Heather Break is available as an option.
- Firing mode: Burst Firing, Single Cycle & Phase Angle as standard
- General Details
- Manuals
- Software
- Size
REVO M 1PH
Thyristor Power Controller
This Product is available only as | ![]() |
![]() | → REVO C 1PH |
- Thyristors suitable for Normal Resistance, Short, Medium & Long Wave IR, and Silicon Carbide load types
- Current range – 35A, 40A, 60A, 90A, 120A, 150A, 180A, 210A, 300A, 400A, 500A, 600A, 700A
- Supply voltage up to 480V, 600V (690V available on units > 280A)
- Microprocessor based electronic circuit fully isolated from the power
- Firing types include Zero Crossing, Single Cycle, Burst Firing, Soft Start + Burst Firing, Delayed Triggering + Burst Firing, Phase
- Angle, Soft Start + Phase Angle
- Input signals from DC Logic (SSR), 4-20mA, 0-10V DC Linear input, 10K Pot or RS485 comms
- Selectable control modes include V, I, V2 & VxI
- Heater Break (HB) alarm to diagnose partial or total load failure with automatic setting, relay alarm output and front LED indication.
- Available as an option
- Digital inputs configurable via front panel keypad
- Internal quick-blow fuses as standard
- RS485 comms (Modbus Protocol) as standard
- Internal Current Transformer included as standard
- Special design Heatsink with high dissipation value
- IP20 protection
- Complies with CE specification, cUL pending
English
Name | Size |
---|
ENG L M CD REVO M-280-700-1PH Manual REVO M 1PH from 280A to 700A (English Version) |
3.7 MiB![]() |
ENG L M CD REVO M-35-40-1PH Manual REVO M 1PH from 35A to 40A (English Version) |
3.8 MiB![]() |
ENG L M CD REVO M-60-210-1PH Manual REVO M 1PH from 60A to 210A (English Version) |
2.5 MiB![]() |

Italiano
Name | Size |
---|
ITA L M CD REVO M-280-700-1PH Manuale REVO M 1PH da 280A a 700A (Versione Italiano) |
3.8 MiB![]() |
ITA L M CD REVO M-35-40-1PH Manuale REVO M 1PH da 35A a 40A (Versione Italiano) |
4.0 MiB![]() |
ITA L M CD REVO M-60-210-1PH Manuale REVO M 1PH da 60A a 210A (Versione Italiano) |
2.6 MiB![]() |

Deutsch
Name | Size |
---|
GER L M CD REVO M-280-700-1PH Bediener Handbuch Revo M 1Ph Digitaler Thyristorsteller 280A ÷ 700A |
2.0 MiB![]() |
GER L M CD REVO M-35-40-1PH Bediener Handbuch Revo M 1PH Digitaler Thyristorsteller 35A ÷ 40A |
1.6 MiB![]() |
GER L M CD REVO M-60-210-1PH Bediener Handbuch Revo M 1PH Digitaler Thyristorsteller 60-210A |
1.4 MiB![]() |
ThyristorConfigurator V5.8.0.5b Thyristor configurator sofwtare |
27.0 MiB![]() |
Driver-USB-for-programming-cable CCA Cable for unit configuration need a driver to be used on Windows PC. This is the executable version to install automatically the driver into the PC system. |
2.0 MiB![]() |
Driver-USB-for-programming-cable CCA Cable for unit configuration need a driver to be used on Windows PC. This is the zipped version of ini file. |
1.3 MiB![]() |