CD3000M 1PH 125-200A, Vmax=480V|600V, Size=s9
CD3000M is a digital and universal Thyristor unit, configurable via serial communication port
* RS485 comm Modbus protocol is included as standard
* Single phase Thyristor unit up to 700A
* Suitable to drive resistive loads with Zero Crossing firing and one phase transformer with Delayed Triggering Microprocessor based electronic circuit fully isolated from power
* Universal Input signal
* Universal Firing, customer configurable via serial port Zero Crossing, Single Cycle, Burst Firing, Delayed Triggering and Phase Angle
* Soft Start can be used with Burst Firing Heater Break circuit microprocessor based to diagnose load failure and short circuit on Thyristors is an option.
* Possibility to read and write the parameters via an external Key pad: cd-kp
* External fuseholder and fuses up to 110A, internal fuses over 110A
* Comply with EMC and cUL
* IP20 Protection

SKU: a18a798c3317 Category:
Additional information

Additional information

Dimensions 187 x 116 x 316 cm
Current Range

, ,

Input

, ,

Max Voltage

,

Firing

, , , ,

Approvals

Options

,

Phases

Feedback

CD Automation Size

Informativa Privacy | Informativa Cookie | Impostazioni Cookie