Selected Options[Current Range (A)>
CD3000S 1PH 35-45A 240V, Vmax=240V, Size=s3
CD3000S 1PH is a compact low cost family of solid state switches designed to replace contactors.
* Single-phase thyristor units up to 700A.
* Applicable for resistive loads and infrared lamp*.
* Zero crossing firing available with logic input signal (SSR) or as an option with Ac 110 Vac or 230 Vac input from 15A to 110A.
* Constant current drain with SSR input.
* Basic analog input 4÷20mA loop powered, with burst firing 8 or 16 cycle at 50% power requested, is available as an option from 15 to 110A.
* Analog input 4÷20mA or 0÷10V with Burst firing 4, 8 or 16 cycle at 50% power requested, is available as an option from 15 to 110A.
* Heater Break alarm (HB) to diagnostic partial or total load failure and short circuit on
* Side by side mounting. Special design for heatsink with high dissipation.
* IP20 protection.
* Comply with EMC specification and CE e cUL.