- Home
- alte Ersatzprodukte
- MULTIDRIVE-1PH digitaler Thyristorsteller
MULTIDRIVE 1PH
Dieses Produkt ist nur als ERSATZPRODUKT erhältlich |
Ersetzen Sie es durch→ REVO C 1PH |
- Von 850 bis zu 2700A
- Max. Spannung 480V oder 600V AC als option
- Lasttyp: Induktive Last, Transformator und MoSi2-Element
- Eingänge: SSR, 0:10V, 4:20mA, 10KPot und Kommunikationsstandard
- Betriebsart: Verzögerte Auslösung + Pulspaketbetrieb + Phasenwinkel oder Soft Start + Phasenwinkel; Strombegrenzung ist mit Phasenwinkel verfügbar
- General Details
- Dokumentation
- Software
- Abmessungen
Multidrive 1PH
Thyristor Power Controller
Dieses Produkt ist nur als erhältlich | ![]() |
![]() | → REVO C 1PH |
- Thyristoren geeignet für ohmsche, induktive und Transformatorlasten.
- Strombereich – 850A, 1000A, 1400A, 1500A, 1850A, 2000A, 2400A, 2700A
- Versorgungsspannung bis zu 480V als Standard, 600V & 690V als Option erhältlich
- Mikroprozessorgestützte elektronische Schaltung, die vollständig vom Stromnetz getrennt ist.
- Betriebsart: Pulspaketbetrieb, Einzelzyklus, Soft Start + Pulspaketbetrieb, verzögerte Auslösung + Pulspaketbetrieb.
- Verzögerte Auslösung + Pulspaketbetrieb, Phasenwinkel, Soft Start + Phasenwinkel.
- Eingangssignale von 4-20mA, 0-10V DC Lineareingang, 10K Pot oder RS485 Kommunikation.
- Wählbare Steuermodi: V, I, VxI, V2.
- Strombegrenzung serienmäßig mit internem Stromwandler, vollständig einstellbar über die Fronttastatur.
- Profilierung der Stromgrenze über Analogeingang.
- Heizstromunterbrechung-Alarm zur Diagnose von Teil- oder Volllastausfällen mit automatischer Einstellung, Relais-Alarmausgang und LED-Anzeige auf der Vorderseite.
- 4 konfigurierbare analoge Ausgänge, 4 Relaisausgänge und 6 digitale Eingänge als Standard.
- Interne träge Sicherungen als Standard.
- RS485-Kommunikation (Modbus-Protokoll) als Standard.
- Kritische Alarme überwachen Phasenverlust, Rotation und bieten thermischen Schutz.
- Spezielles Design Kühlkörper mit hohem Verlustleistungswert.
- Schutzart IP20Erfüllt die CE-Spezifikation.
English
Name | Size |
---|
ENG L M CD Multidrive-1PH 1100A Manual MULTIDRIVE 1PH 1100A (English Version) |
3.4 MiB![]() |
ENG L M CD Multidrive-1PH 1500A Manual MULTIDRIVE 1PH 1500A (English Version) |
2.5 MiB![]() |
ENG L M CD Multidrive-1PH 850A Manual MULTIDRIVE 1PH 850A (English Version) |
3.4 MiB![]() |
ENG L M CD Multidrive-1PH 850A - 690V Manual MULTIDRIVE 1PH 850A - 690V (English Version) |
4.3 MiB![]() |

Deutsch
Name | Size |
---|
GER L M CD Multidrive-1PH 25-700A Handbuch MULTIDRIVE 1PH von 25A bis 700A |
0.9 MiB![]() |
ThyristorConfigurator V5.8.0.5b Thyristor configurator sofwtare |
27.0 MiB![]() |

The software configuration is free and it is possible to download it by clicking the image on the left.
If the Order Code is in line with requirement, then MULTIDRIVE has been already configured in Factory and it’s ready to use. You need the software only to modify the ordered configuration. Anyway we suggest to check the unit on the machine with the „Test unit“ section. To install the software, launch the program and follow the instructions on the screen. To connect the unit at the PC, it’s necessary to use the programming cable connected between the PG connectorand the serial port RS232 of the PC. The programming cable is not included. With the CD-RS serial converter is possible configure the Thyristor unit also through the RS485. For this solution, the programming cable is not necessary.
ThyristorConfigurator V5.8.0.5b Thyristor configurator sofwtare |
27.0 MiB![]() |
Driver-USB-for-programming-cable CCA Cable for unit configuration need a driver to be used on Windows PC. This is the executable version to install automatically the driver into the PC system. |
2.0 MiB![]() |
Driver-USB-for-programming-cable CCA Cable for unit configuration need a driver to be used on Windows PC. This is the zipped version of ini file. |
1.3 MiB![]() |