REVO S 2PH


  • From 30 up to 800A
  • Voltage range 480V, 600V and 690V
  • Load type: Resistance, IR Lamp long and medium waveform
  • Inputs: SSR Std, 0:10V, 4:20mA and Heather Break alarm are options
  • Firing mode: Zero Crossing, Burst Firing available with analogue input only

General Details


REVO S 2PH

Thyristor Power Controller

  • REVO S 2PH Thyristor Power Controller is suitable for resistive and medium or long wave infrared loads
  • Current range – 30A, 35A, 40A, 60A, 75A, 90A, 120A, 150A, 180A, 210A, 300A, 400A, 450A, 500A, 600A, 700A, 800A
  • Voltage range 480V, 600V and 690V
  • Fully isolated from the power
  • Zero crossing firing mode (ZC) or Burst Firing (4, 8 or 16 cycles selectable)
  • Logic input signal 4 to 30V DC typical (SSR) plus 4-20mA or 0-10V DC Linear input as an option
  • Constant current drain, independent of supply voltage with SSR input
  • Heater Break (HB) alarm to diagnose partial or total load failure with automatic setting, relay alarm output and front LED indication. Available as an option
  • Side by side mounting
  • Special design Heatsink with high dissipation value
  • IP20 protection
  • Complies with EMC, cULus® 508 Listed and cUL® listed up to 700A as an option
Documentation

REVO S 2PH -Documentation

Manuals

NameSize
ENG REVO-S-2PH-30-40A-Solid-State-relay

USER’S MANUAL REVO S 2PH from 30 to 40A (M-RS2-30-40)

0.9 MiB
ENG REVO-S-2PH-300-800-Solid-State-relay

USER’S MANUAL REVO S 2PH from 300 to 800A (M-RS2-300-800)

1.1 MiB
ENG REVO-S-2PH-60-210A-Solid-State-relay

USER’S MANUAL REVO S 2PH from 60 to 210A (M-RS2-60-210)

1.1 MiB
ENG REVO-S-2PH-60-800-690V-Solid-State-relay

USER’S MANUAL REVO S 2PH from 60 to 800A - 690V (M-RS2-60-800-690V)

1.1 MiB
ENG REVO-S-IFH-2PH-30-40A-Solid-State-relay

USER’S MANUAL REVO S 2PH IFH (Internal Fuses) from 30 to 40A (M-RS2-IFH-30-40)

1.9 MiB
GER L M CD REVO S IFH-30-40-2PH

Bediener Handbuch REVO S-2PH Thyristorschalter /SSR mit IFH Option 30-40A

0.9 MiB
GER L M CD REVO S-280-700-2PH

Bediener Handbuch Revo S 2Ph Thyristorschalter 280 ÷ 700 A

1.8 MiB
GER L M CD REVO S-30-40-2PH

Bediener Handbuch Revo SSR 2PH Solid-State-Relais 30 ÷ 40A

0.6 MiB
GER L M CD REVO S-60-210-2PH

Bediener Handbuch Revo S 2PH Thyristorschalter 60÷90A und120÷210A

1.7 MiB
ITA REVO-S-2PH-30-40A-Solid-State-relay

MANUALE D’USO REVO S 2PH da 30 a 40A (M-RS2-30-40)

0.8 MiB
ITA REVO-S-2PH-300-800-Solid-State-relay

MANUALE D’USO REVO S 2PH da 300 a 800A (M-RS2-300-800)

1.0 MiB
ITA REVO-S-2PH-60-210A-Solid-State-relay

MANUALE D’USO REVO S 2PH da 60 a 210A (M-RS2-60-210)

1.0 MiB
ITA REVO-S-2PH-60-800-690V-Solid-State-relay

MANUALE D’USO REVO S 2PH da 60 a 800A - 690V (M-RS2-60-800-690V)

1.0 MiB
ITA REVO-S-IFH-2PH-30-40A-Solid-State-relay

MANUALE D’USO REVO S 2PH IFH (fusibili interni) da 30 a 40A (M-RS2-IFH-30-40)

1.8 MiB

3D Models

SR4

3D file for size SR4

3.2 MiB

SR7

3D file for size SR7

2.3 MiB

SR15

3D file for size SR15

3.4 MiB

SR16

3D file for size SR16

6.8 MiB

S11

3D file for size S11

1.5 MiB

S13

3D file for size S13

1.5 MiB

S14

3D file for size S14

1.0 MiB

S16

3D file for size S16

2.3 MiB

Code & Size

REVO S 2PH – Order Code


REVO S 2PH – Size & Dimensions

Copyright © 2010 Cd Automation S.r.l. - Via P.Picasso 34/36, Legnano, MI - Tel: +39 0331 577479 - Fax: +39 0331 579479 - - PIVA:IT08925720156 - Tribunale di Milano REA:1255303 - Capitale sociale:€ 26.000,00 - All Rights Reserved.
ASK FOR INFORMATION AND QUOTATION
| Informativa Privacy | Informativa Cookie |
Diritti Interessati | Impostazioni Cookie |