REVO TC 1PH Temperature and Power Controller
REVO TC 1PH
- Suitable for Normal Resistance load types
- From 30A to 210A
- Max. voltage 480V, 600Vac
- Load type: Resistance
- Inputs: Pt100, Thermo Couple, 0:10V, 4:20mA
- Heather Break alarm options
- Firing mode: Zero Crossing
REVO TC 2PH Temperature and Power Controller PID
REVO TC 2PH
- Suitable for Normal Resistance load types
- Current range - 30A, 35A, 40A, 60A, 90A, 120A, 150A, 180A, 210A
- Supply voltage up to 480V, 600Vac
- Microprocessor based electronic circuit fully isolated from the power
- Thyristor Firing types include Zero Crossing Firing
- Controller input signals from Thermocouple, PT100 (3 wire RTD), 4-20mA and 0-10V DC Linear
- Up to 4 configurable Controller outputs (Relay, SSR and 4-20mA)
REVO TC 3PH – Temperature and Power Controller 3PH
REVO TC 3PH
- Suitable for Normal Resistance
- Three Phase 3PH (3-Leg) From 30A to 210A
- Max. voltage 480V, 600Vac
- Load type: Resistance
- Inputs: Pt100, Thermo Couple, 0:10V, 4:20mA
- Heather Break alarm options
- Firing mode: Zero Crossing
Multidrive 1PH Thyristor Power Controller
MULTIDRIVE 1PH
| This Product is available only as SPARE PRODUCT |
| Substitute it with→ REVO C 1PH |
- From 850 up to 2700A
- Max. voltage 480V, 600V or 690V AC as option
- Load type: Inductive Load, Transformer and MoSi2 element.
- Inputs: SSR, 0:10V, 4:20mA, 10KPot and Communication Std.
- Firing mode: Delay Triggering + Burst Firing (DT), Phase Angle (PA) or Soft Start + Phase Angle (S+PA); Current Limit is available with Phase Angle
Multidrive 2PH Thyristor Power Controller
MULTIDRIVE 2PH
| This Product is available only as SPARE PRODUCT |
| Substitute it with→ REVO C 2PH |
- From 45 up to 2700A
- Max. voltage 480V or 600V & 690V AC as an option
- Load type: Inductive Load, Transformer and Pure Resistance Element.
- Inputs: SSR, 0:10V, 4:20mA, 10KPot and Communication Std.
- Firing mode: Burst Firing, Delay Triggering + Burst Firing (DT)
- N°4 Retransmission are available plus IO
Multidrive 3PH Thyristor Power Controller
MULTIDRIVE 3PH
| This Product is available only as SPARE PRODUCT |
| Substitute it with→ REVO C 3PH |
- From 45 up to 2700A
- Max. voltage 480V or 600V & 690V AC as an option
- Load type: Inductive Load, Transformer and MoSi2 element.
- Inputs: SSR, 0:10V, 4:20mA, 10KPot and Communication Std.
- Firing mode: Burst Firing, Delay Triggering + Burst Firing, Phase Angle + Soft Start
- Current Limit is available with Phase Angle Firing
- N°4 Retransmission are available plus IO
REVO M 1PH Thyristor Power Controller
REVO M 1PH
| This Product is available only as SPARE PRODUCT |
| Substitute it with→ REVO C 1PH |
- From 30 up to 700A
- Max. voltage 480V or 600V AC as option
- (690V available on units > 280A)
- Load type: Resistance, IR Lamp short waveform and SiC element.
- Inputs: SSR, 0:10V, 4:20mA, 10KPot and Communication Std.
- Heather Break is available as an option.
- Firing mode: Burst Firing, Single Cycle & Phase Angle as standard
REVO M 2PH Thyristor Power Controller 2 legs
REVO M 1PH
| This Product is available only as SPARE PRODUCT |
| Substitute it with→ REVO C 2PH |
- From 30 up to 700A
- Max. voltage 480V or 600V AC as option
- (690V available on units > 280A)
- Load type: Resistance, IR Lamp short waveform and SiC element.
- Inputs: SSR, 0:10V, 4:20mA, 10KPot and Communication Std.
- Heather Break is available as an option.
- Firing mode: Burst Firing as standard
REVO M 3PH – Three phase Thyristor Power Unit
REVO M 3PH
| This Product is available only as SPARE PRODUCT |
| Substitute it with→ REVO C 3PH |
- From 30 up to 500A
- Max. voltage 480V or 600V AC as option
- (690V available on units > 280A)
- Load type: Resistance, IR Lamp short waveform and SiC element.
- Inputs: SSR, 0:10V, 4:20mA, 10KPot and Communication Std.
- Heather Break is available as an option.
- Firing mode: Burst Firing as standard
REVO E 2PH Thyristor Power Controller two legs
REVO E 2PH
| This Product is available only as SPARE PRODUCT |
| Substitute it with→ REVO C 2PH |
- From 25 up to 700A
- Max. voltage 480V or 600V AC as option
- Load type: Resistance, Transformer
- Inputs: SSR, 0:10V, 4:20mA, 10KPot and Communication Std.
- Firing mode: Burst Firing, Delay Triggering + Burst Firing (DT)
- N°1 Retransmission is available
REVO E 3PH Thyristor Power Controller
REVO E 3PH
| This Product is available only as SPARE PRODUCT |
| Substitute it with→ REVO C 3PH |
- From 35 up to 500A
- Max. voltage 480V or 600V AC as option
- Designed to drive resistive, transformer loads and MoSi2 Elements
- Inputs: SSR, 0:10V, 4:20mA, 10KPot and Communication Std.
- Firing mode: zero crossing, burst firing, single cycle, soft start + burst firing and phase angle + soft start
- N°1 Retransmission is available
REVO CL Thyristor Power Controller
REVO CL
| This Product is available only as SPARE PRODUCT |
| Substitute it with→ REVO C 1PH |
- From 35 up to 700A
- Max. voltage 480V or 600V AC as option
- (690V available on units > 280A)
- Load type: Inductive Load, Transformer, UV Lamp and MoSi2 element.
- Inputs: SSR, 0:10V, 4:20mA, 10KPot and Communication Std.
- Firing mode: Delay Triggering + Burst Firing (DT), Phase Angle (PA) or Soft Start + Phase Angle (S+PA); Current Limit is available with Phase Angle
REVO HMI for Modular Controller
- Up to 30 zone can be managed
- For Revo TC 1-2-3PH and REVO TCM
- 4.3, 7.0, 10” Colour Display
- Trend display
- Recipy Management
- Warm up Planner
- Multi Language Interface (EN, DE, IT and FR)