Chose the right SCR Power Controller in terms of price/performance/technology that meet your needs.

Showing 1–10 of 127 results

CD3000E 2ph 200A

CD3000E 2ph 200A, Vmax=480V|600V, Size=s9 (w120xd220xh350mm)
CD3000E 2PH is a Full digital and universal Thyristor unit based on a very powerful dedicated micro configurable via serial communication port for all inputs, firing modes, control modes and loads types.
* Integrated fixed fuses and all what is necessary to have a complete power control zone including current transformer and optional circuit board
* Two leg switching three wires load star or delta connections.
* Suitable to drive resistive loads and three phase transformer.
* Frontal Key Pad to control the unit and to read power, current and voltage value.
* Universal Input signal with automatic zero/span calibration.
* Universal Firing modes, customer configurable via Rs485 comm. Modbus or communication port as Burst Firing, Single Cycle and Delayed Triggering.
* Power, voltage and current control mode
* Unbalanced load and Heater Break Alarm.
* RS 485 port. Modbus protocol.
* Comply with EMC and
* IP20 Protection

CD3000E 2ph 280-700A

CD3000E 2ph 280-700A, Vmax=480V|600V, Size=s14
CD3000E 2PH is a Full digital and universal Thyristor unit based on a very powerful dedicated micro configurable via serial communication port for all inputs, firing modes, control modes and loads types.
* Integrated fixed fuses and all what is necessary to have a complete power control zone including current transformer and optional circuit board
* Two leg switching three wires load star or delta connections.
* Suitable to drive resistive loads and three phase transformer.
* Frontal Key Pad to control the unit and to read power, current and voltage value.
* Universal Input signal with automatic zero/span calibration.
* Universal Firing modes, customer configurable via Rs485 comm. Modbus or communication port as Burst Firing, Single Cycle and Delayed Triggering.
* Power, voltage and current control mode
* Unbalanced load and Heater Break Alarm.
* RS 485 port. Modbus protocol.
* Comply with EMC and
* IP20 Protection

CD3000E 2ph 35-150A

CD3000E 2ph 35-150A, Vmax=480V|600V, Size=s9
CD3000E 2PH is a Full digital and universal Thyristor unit based on a very powerful dedicated micro configurable via serial communication port for all inputs, firing modes, control modes and loads types.
* Integrated fixed fuses and all what is necessary to have a complete power control zone including current transformer and optional circuit board
* Two leg switching three wires load star or delta connections.
* Suitable to drive resistive loads and three phase transformer.
* Frontal Key Pad to control the unit and to read power, current and voltage value.
* Universal Input signal with automatic zero/span calibration.
* Universal Firing modes, customer configurable via Rs485 comm. Modbus or communication port as Burst Firing, Single Cycle and Delayed Triggering.
* Power, voltage and current control mode
* Unbalanced load and Heater Break Alarm.
* RS 485 port. Modbus protocol.
* Comply with EMC and
* IP20 Protection

CD3000E 3PH 100-150A

CD3000E 3PH 100-150A, Vmax=480V|600V, Size=s11
CD3000E 3PH is a Full digital and universal Thyristor unit based on a very powerful dedicated micro configurable via serial communication port for all inputs, firing modes, control modes and loads types.
* Suitable to drive resistive, inductive, transformer and complex loads requiring current limit and power feedback.
* Internal Key Pad to control the unit and to read power, current and voltage value.
* Universal Input signal with automatic zero/span calibration.
* Universal Firing modes, customer configurable via Rs485 comm. as Burst Firing, Single Cycle and Phase Angle.
* Universal Control Mode.
* Soft Start can be used in addition to Burst Firing.
* Unbalanced load and Heater Break Alarm.
* RS 485 port. Modbus protocol.
* Internal fuses are standard on CD3000E-3PH
* Comply with EMC and
* IP20 Protection

CD3000E 3PH 225A

CD3000E 3PH 225A, Vmax=480V|600V, Size=s13
CD3000E 3PH is a Full digital and universal Thyristor unit based on a very powerful dedicated micro configurable via serial communication port for all inputs, firing modes, control modes and loads types.
* Suitable to drive resistive, inductive, transformer and complex loads requiring current limit and power feedback.
* Internal Key Pad to control the unit and to read power, current and voltage value.
* Universal Input signal with automatic zero/span calibration.
* Universal Firing modes, customer configurable via Rs485 comm. as Burst Firing, Single Cycle and Phase Angle.
* Universal Control Mode.
* Soft Start can be used in addition to Burst Firing.
* Unbalanced load and Heater Break Alarm.
* RS 485 port. Modbus protocol.
* Internal fuses are standard on CD3000E-3PH
* Comply with EMC and
* IP20 Protection

CD3000E 3PH 300-500A

CD3000E 3PH 300-500A, Vmax=480V|600V, Size=s14
CD3000E 3PH is a Full digital and universal Thyristor unit based on a very powerful dedicated micro configurable via serial communication port for all inputs, firing modes, control modes and loads types.
* Suitable to drive resistive, inductive, transformer and complex loads requiring current limit and power feedback.
* Internal Key Pad to control the unit and to read power, current and voltage value.
* Universal Input signal with automatic zero/span calibration.
* Universal Firing modes, customer configurable via Rs485 comm. as Burst Firing, Single Cycle and Phase Angle.
* Universal Control Mode.
* Soft Start can be used in addition to Burst Firing.
* Unbalanced load and Heater Break Alarm.
* RS 485 port. Modbus protocol.
* Internal fuses are standard on CD3000E-3PH
* Comply with EMC and
* IP20 Protection

CD3000E 3PH 35-75A

CD3000E 3PH 35-75A, Vmax=480V|600V, Size=s9
CD3000E 3PH is a Full digital and universal Thyristor unit based on a very powerful dedicated micro configurable via serial communication port for all inputs, firing modes, control modes and loads types.
* Suitable to drive resistive, inductive, transformer and complex loads requiring current limit and power feedback.
* Internal Key Pad to control the unit and to read power, current and voltage value.
* Universal Input signal with automatic zero/span calibration.
* Universal Firing modes, customer configurable via Rs485 comm. as Burst Firing, Single Cycle and Phase Angle.
* Universal Control Mode.
* Soft Start can be used in addition to Burst Firing.
* Unbalanced load and Heater Break Alarm.
* RS 485 port. Modbus protocol.
* Internal fuses are standard on CD3000E-3PH
* Comply with EMC and
* IP20 Protection

CD3000M 1PH 110A

CD3000M 1PH 110A, Vmax=480V|600V, Size=s8c
CD3000M is a digital and universal Thyristor unit, configurable via serial communication port
* RS485 comm Modbus protocol is included as standard
* Single phase Thyristor unit up to 700A
* Suitable to drive resistive loads with Zero Crossing firing and one phase transformer with Delayed Triggering Microprocessor based electronic circuit fully isolated from power
* Universal Input signal
* Universal Firing, customer configurable via serial port Zero Crossing, Single Cycle, Burst Firing, Delayed Triggering and Phase Angle
* Soft Start can be used with Burst Firing Heater Break circuit microprocessor based to diagnose load failure and short circuit on Thyristors is an option.
* Possibility to read and write the parameters via an external Key pad: cd-kp
* External fuseholder and fuses up to 110A, internal fuses over 110A
* Comply with EMC and cUL
* IP20 Protection

CD3000M 1PH 125-200A

CD3000M 1PH 125-200A, Vmax=480V|600V, Size=s9
CD3000M is a digital and universal Thyristor unit, configurable via serial communication port
* RS485 comm Modbus protocol is included as standard
* Single phase Thyristor unit up to 700A
* Suitable to drive resistive loads with Zero Crossing firing and one phase transformer with Delayed Triggering Microprocessor based electronic circuit fully isolated from power
* Universal Input signal
* Universal Firing, customer configurable via serial port Zero Crossing, Single Cycle, Burst Firing, Delayed Triggering and Phase Angle
* Soft Start can be used with Burst Firing Heater Break circuit microprocessor based to diagnose load failure and short circuit on Thyristors is an option.
* Possibility to read and write the parameters via an external Key pad: cd-kp
* External fuseholder and fuses up to 110A, internal fuses over 110A
* Comply with EMC and cUL
* IP20 Protection

CD3000M 1PH 15-25A

CD3000M 1PH 15-25A, Vmax=480V|600V, Size=s0c
CD3000M is a digital and universal Thyristor unit, configurable via serial communication port
* RS485 comm Modbus protocol is included as standard
* Single phase Thyristor unit up to 700A
* Suitable to drive resistive loads with Zero Crossing firing and one phase transformer with Delayed Triggering Microprocessor based electronic circuit fully isolated from power
* Universal Input signal
* Universal Firing, customer configurable via serial port Zero Crossing, Single Cycle, Burst Firing, Delayed Triggering and Phase Angle
* Soft Start can be used with Burst Firing Heater Break circuit microprocessor based to diagnose load failure and short circuit on Thyristors is an option.
* Possibility to read and write the parameters via an external Key pad: cd-kp
* External fuseholder and fuses up to 110A, internal fuses over 110A
* Comply with EMC and cUL
* IP20 Protection

Informativa Privacy | Informativa Cookie | Impostazioni Cookie