REVEX 1PH – The Power Controller On Demand
REVEX 1PH
Technical Specification
- Load type: Normal Resistance, Infrared Short, Medium and Long, Transformer Primary, Cold resistance and SiC elements
- Inputs: 4:20mA, 0:10V, SSR and ModBus as std.
- Firing mode: Half Cycle, Single Cycle, Burst Firing, Delayed Triggering, Phase Angle with or without Soft Start
- Control Mode: Voltage, Current and Power or V2 and I2 with additional Transfer to VxI
- Communication: RS485 port. RTU Modbus® Protocol
- USB: Port integrated for configuration in safety mode (No Load and Auxiliary Voltage needed) Unit Powered Through USB
- Approvals: Comply with EMC
- Dual Current Limit: For peak and RMS value
- All options are shown below with the relevant model code
- HB Alarm to diagnose partial or Total Load Failure and Thyristor Short Circuit

REVEX 2PH – The Power Controller On Demand
REVEX 2PH
Technical Specification
- Load type: Normal Resistance, Infrared Short, Medium and Long waveform
- Inputs: 4:20mA, 0:10V, SSR and ModBus as std.
- Firing mode: Burst Firing, Zero Crossing
- Control Mode: Voltage, Current and Power or V2 and I2
- Communication: RS485 port. RTU Modbus® Protocol
- USB: Port integrated for configuration in safety mode (No Load and Auxiliary Voltage needed) Unit Powered Through USB
- Approvals: Comply with EMC
- Dual Current Limit: For peak and RMS value
- All options are shown below with the relevant model code
- HB Alarm to diagnose partial or Total Load Failure and Thyristor Short Circuit

REVO C 1PH – Revo Connect Universal SCR Power Controller Single Phase
REVO C 1PH
- Phases: 1
- Current Range from 30 to 2100A.
- Voltage Range 480V, 600V and 690V.
- Inputs: 4:20mA, 0:10V, SSR and ModBus as std and different Field Bus Listed in the Product Coding
- Firing mode: Half Cycle, Single Cycle, Burst Firing, Delayed Triggering, Phase Angle with or without Soft Start
- Control Mode: Voltage, Current and Power or V2 and I2 with additional Transfer to VxI
- USB: port integrated for configuration in safety mode (No Load and Auxiliary Voltage needed) Unit Powered Through USB
- 100 kA: Short Circuit Current Rating (SCCR) up to 600V
- Approvals CE+EMC; cUL from 30A to 700A, UL from 800A to 2100A
REVEX 3PH – The Power Controller On Demand
REVEX 3PH
Technical Specification
- Load type: Normal Resistance, Infrared Short, Medium and Long Waveform
- Inputs: 4:20mA, 0:10V, SSR and ModBus as std.
- Firing mode: Burst Firing, Zero Crossing
- Control Mode: Voltage, Current and Power or V2 and I2 with additional Transfer to VxI
- Communication: RS485 port. RTU Modbus® Protocol
- USB: Port integrated for configuration in safety mode (No Load and Auxiliary Voltage needed) Unit Powered Through USB
- Approvals: Comply with EMC
- Dual Current Limit: For peak and RMS value
- All options are shown below with the relevant model code
- HB Alarm to diagnose partial or Total Load Failure and Thyristor Short Circuit

REVO C 2PH – Revo Connect Universal SCR Power Controller Two Phases
REVO C 2PH
- Phases: 2
- Current Range from 30 to 2100A.
- Voltage Range 480V, 600V and 690V.
- Inputs: 4:20mA, 0:10V, SSR and ModBus as std and different Field Bus Listed in the Product Coding
- Load type: Normal Resistance, Infrared Short, Medium and Long, Transformar Primary using Delayed Triggering
- Firing mode: Burst Firing, Zero Crossing.
- USB: port integrated for configuration in safety mode (No Load and Auxiliary Voltage needed) Unit Powered Through USB
- 100 kA: Short Circuit Current Rating (SCCR) up to 600V
- Approvals CE+EMC; cUL from 30A to 700A, UL from 800A to 2100A
REVO C 3PH – Revo Connect Universal SCR Power Controller Three Phases
REVO C 3PH
- Phases: 3
- Current Range from 30 to 2100A.
- Voltage Range 480V, 600V and 690V.
- Inputs: 4:20mA, 0:10V, SSR and ModBus as std and different Field Bus Listed in the Product Coding
- Firing mode: Burst Firing, Delayed Triggering and Phase Angle with or without Soft Start
- Control Mode: Voltage, Current and Power or V2 and I2 with additional Transfer to VxI
- USB: port integrated for configuration in safety mode (No Load and Auxiliary Voltage needed) Unit Powered Through USB
- 100 kA: Short Circuit Current Rating (SCCR) up to 600V
- Approvals CE+EMC; cUL from 30A to 500A, UL from 600A to 2100A