Home » CD3000 S Family » CD3000S 3PH – From 15A to 90A
CD3000S 3PH
Technical Specification
- Voltage power supply: 24V min, 480V Max, 600V on request
- Input Signal: SSR (OFF state <1Vdc ON = 4÷30 Vdc) firing.
- Firing: Zero crossing ZC.
- Auxiliary Voltage Supply: 10Va power consumption.
- Fan Voltage: 230V ± 15%.
- Approvals:Comply with EMC; cULus available as an option.
- Mounting: Din rail mounting up to 90A.
- Operating Temperature: 0÷40° up to 90A included (for higher temperature see the derating curve)
Categories: Three Phase (3PH) 3-Leg, CD3000 S Family, Thyristor Power Controller
- General Details
- Code & Size
- Documentation
- Related Products
General Details
CD3000S 3PH
From 15A to 90A
CD3000S 3PH is a three leg switching three wire resistive load.
General description
- Up to 90A.
- Applicable for resistive loads and infrared lamp.
- Fully isolated from power.
- Applicable for resistive loads.
- Zero crossing firing.
- Logic input signal SSR.
- Constant current drain.
- Side by side packaging.
- Special design for heatsink with high dissipation
- IP20 protection
- Comply with EMC specification CE and cUL
Documentation
CD3000S 3PH – Documentation
Manuals
Name | Size |
---|
ENG CD3000S-3PH-15-90A USER'S MANUAL CD3000s 3PH from 15 to 90A (M-3000S3-15-90) | 0.6 MiB![]() |
FRA L M CD CD3000S-3PH 15-90A Manuel CD3000S 3PH de 15A à 90A (Version Française) | 0.3 MiB![]() |
FRA L M CD CD3000S-3PH 125-500A Manuel CD3000S 1PH de 125A à 500A (Version Française) | 1.1 MiB![]() |
GER L M CD CD3000S-3PH 15-90A Handbuch CD3000S 3PH Thyristorschalter von 15A÷90A | 0.3 MiB![]() |
GER L M CD CD3000S-3PH 125-500A Handbuch CD3000S 3PH Thyristorsteller 125A - 500A | 1.0 MiB![]() |
ITA L M CD CD3000S-3PH 15-90A Manuale CD3000S 3PH da 15A a 90A | 0.3 MiB![]() |
ITA L M CD CD3000S-3PH 125-500A Manuale CD3000S 3PH da 125A a 500A | 0.7 MiB![]() |
Related Products
CD3000S 1PH – From 10A to 90A
CD3000S 1PH
Technical Specification
- Voltage power supply: 24V min, 480V Max, 600V on request
- Input Signal: SSR , Analog 4÷20mA and 0÷10V is available as an option on units from 15A÷90A included
- Firing: Zero crossing ZC / Burst Firing
- Fan Voltage: Supply 230V ± 15% (110V is available as an option)
- Heater Break Alarm: Discrimination better than 20%. * Circuit microprocessor based to diagnose partial or total load failure and short circuit on Thyristor. * Latching alarm plus reset. * Relay output 1A at 230V. * Automatic calibration of one or more unit at the same time using a dedicated digital input or using for each unit the calibration button.
- Approvals: EMC; cULus available as an option on basic units
- Mounting: Din rail mounting up to 90A included, bulkhead over 110A, IP20 protection
- Operating Temperature: 0÷40° up to 90A included (for higher temperature see the derating curve)
CD3000S 2PH – From 10A to 90A
CD3000S 2PH
Technical Specification
- Voltage power supply: 24V min, 480V Max, 600V on request
- Input Signal: SSR (OFF state <1Vdc ON = 4÷30 Vdc) is standard up to 90A included. Analog input 4÷20mA and 0÷10V is available from 35A (included) to 90A (included)
- Firing: Zero crossing ZC; Burst Firing 4/8/16 with 4÷20mA or 0÷10V with 12÷24V aux. power supply.
- Fan Voltage: 230V ± 15% standard f(110V on request opt., if current ≥75A).
- Heater Break Alarm: Discrimination better than 20%. * Circuit microprocessor based to diagnose partial or total load failure and short circuit on Thyristor. * Latching alarm plus reset. * Relay output 1A at 230V. * Automatic calibration of one or more unit at the same time using a dedicated digital input or using for each unit the calibration button.
- Approvals: Comply with EMC; cULus available as an option on basic units.
- Mounting: Din rail mounting up to 90A included.
- Operating Temperature: 0÷40° up to 90A included (for higher temperature see the derating curve)