Multidrive 2PH Thyristor Power Controller it is a Universal and Digital Thyristor Power Unit based on powerfull microprcessor. With serial communication it is possible to configure all inputs, firing mode and Control mode.
- Suitable for normal resistance & transformer coupled with normal resistive loads
- Current range – 45A, 75A, 100A, 125A, 150A, 225A, 275A, 400A, 450A, 500A, 600A, 850A, 1000A, 1400A, 1500A, 1850A, 2000A, 2400A, 2700A
- Supply voltage up to 480V as standard, 600V ; 690V available as option
- Microprocessor based electronic circuit fully isolated from the power
- Firing types include Burst Firing (BF), Delayed Triggering + Burst Firing (DT+BF)
- Input signals from 4-20mA, 0-10V DC Linear input, 10K Pot or RS485 comms
- Selectable control modes include V, VxI and external feedback selection
- Internal current transformer.
- Heater Break (HB) alarm to diagnose partial or total load failure with automatic setting, relay alarm output and front LED indication.
- 4 configurable Analogue outputs, 4 Relay outputs and 6 Digital inputs as standard
- Internal quick-blow fuses as standard
- RS485 comms (Modbus Protocol) as standard
- Critical Alarms monitor phase loss, rotation and provide Thermal Protection
- Special design Heatsink with high dissipation value
- IP20 protection, cUL us is available as an option.
|ENG L M CD Multidrive-2PH 1000A
||3.4 MiB 4 June 2014
|ENG L M CD Multidrive-2PH 1100-2100A
||3.2 MiB 2 May 2016
|ENG L M CD Multidrive-2PH 1500A
||1.9 MiB 4 June 2014
|ENG L M CD Multidrive-2PH 2000A
||1.9 MiB 13 July 2015
|ENG L M CD Multidrive-2PH 2700A
||1.8 MiB 13 July 2015
|ENG L M CD Multidrive-2PH 45-850A
||2.5 MiB 11 December 2015
|Serial Communication Multidrive
MULTIDRIVE Serial MODBUS Communication Manual (English Version)
|693.5 KiB 7 October 2014
|ITA L M CD Multidrive-2PH 25-850A
||2.6 MiB 4 June 2014
|FRA L M CD MULTIDRIVE-2PH
||3.0 MiB 4 June 2014
|GER L M CD Multidrive-2PH 25-700A
||1.7 MiB 4 June 2014
Thyristor configurator sofware
|22.8 MiB 26 May 2016
CCA Cable for unit configuration need a driver to be used on Windows PC. This is the executable version to install automatically the driver into the PC system.
|2.0 MiB 6 May 2016
CCA Cable for unit configuration need a driver to be used on Windows PC. This is the zipped version of ini file.
|1.3 MiB 6 May 2016
CD3000M / CD3200 Software Testing Kit for Modbus communication. To connect the unit at the PC, it's necessary use the programming cable connected between the PG connector and the serial port RS232 of the PC. The programming cable is not included.
|1.0 MiB 4 June 2014