- From 35 up to 700A
- Max. voltage 480V or 600V AC as option
- (690V available on units > 280A)
- Load type: Inductive Load, Transformer, UV Lamp and MoSi2 element.
- Inputs: SSR, 0:10V, 4:20mA, 10KPot and Communication Std.
- Firing mode: Delay Triggering + Burst Firing (DT), Phase Angle (PA) or Soft Start + Phase Angle (S+PA); Current Limit is available with Phase Angle
REVO CL Thyristor Power Controller
- SCR Power Controller suitable for inductive & transformer loads
- Current range – 35A, 40A, 60A, 90A, 120A, 150A, 180A, 210A, 280A, 400A, 500A, 600A, 700A
- Supply voltage up to 480V, 600V (690V available on units => 280A) as option
- Microprocessor based electronic circuit fully isolated from the power
- Firing types include Delayed Triggering + Burst Firing (DT), Phase Angle or Soft Start + Phase Angle (S+PA)
- Input signals from 4-20mA, 0-10V DC Linear input, 10K Pot or RS485 comms
- Selectable control modes include V, I, V2 & VxI
- Current Limit CL as standard including internal Current Transformer, fully adjustable via front panel keypad
- Profiling of current limit via analogue input
- Heater Break Alarm HB to diagnose partial or total load failure with automatic setting, relay alarm output and front LED indication.
- Available as an option
- Digital inputs configurable via front panel keypad
- Internal quick-blow fuses as standard
- RS485 comms (Modbus Protocol) as standard
- Special design Heatsink with high dissipation value
- IP20 protection
- Complies with CE specification, cUL pending
English
| Name | Size | Date |
|---|
| ENG L M CD REVO CL-280-700 Manual REVO CL from 280A to 700A (English Version) |
3.2 MiB 4 June 2014 |
| ENG L M CD REVO CL-35-40 Manual REVO CL from 35A to 40A (English Version) |
3.5 MiB 17 July 2015 |
| ENG L M CD REVO CL-60-210 Manual REVO CL from 60A to 210A (English Version) |
2.6 MiB 17 July 2015 |
| Serial Communication REVO-CL REVO CL Serial MODBUS Communication Manual (English Version) |
732.6 KiB 7 October 2014 |
Italiano
| Name | Size | Date |
|---|
| CD-Ita-REVO-CL-1PH-60-210A-Thyristors-Units |
2.8 MiB 28 March 2017 |
| ITA L M CD REVO CL-280-700 Manuale REVO CL da 280A a 700A (Versione Italiano) |
3.6 MiB 4 June 2014 |
| ITA L M CD REVO CL-35-40 Manuale REVO CL da 35A a 40A (Versione Italiano) |
3.8 MiB 4 June 2014 |
Deutsch
| Name | Size | Date |
|---|
| GER L M CD REVO CL 30-45A Manuelle REVO CL von 30A bis 45A (Deutsch Version) |
2.8 MiB 9 May 2016 |
| GER L M CD REVO CL-280-700 Manuelle REVO CL von 280A bis 700A (Deutsch Version) |
2.0 MiB 4 June 2014 |
| GER L M CD REVO CL-60-210 Manuelle REVO CL von 60A bis 210A (Deutsch Version) |
1.9 MiB 4 June 2014 |
| Name | Size | Date |
|---|
| ENG REVO CL 1PH 280 To 700 Datasheet REVO CL Thyristor Power Controller from 280A to 700A (English Version) |
500.1 KiB 4 June 2014 |
| ENG REVO CL 1PH 35 To 40 Datasheet REVO CL Thyristor Power Controller from 35A to 40A (English Version) |
443.6 KiB 4 June 2014 |
| ENG REVO CL 1PH 60 To 210 Datasheet REVO CL Thyristor Power Controller from 60A to 210A (English Version) |
446.4 KiB 4 June 2014 |
| ThyristorConfigurator V5.6.4.14 Thyristor configurator sofware |
22.8 MiB 26 May 2016 |
| Driver-USB-for-programming-cable CCA Cable for unit configuration need a driver to be used on Windows PC. This is the executable version to install automatically the driver into the PC system. |
2.0 MiB 6 May 2016 |
| Driver-USB-for-programming-cable CCA Cable for unit configuration need a driver to be used on Windows PC. This is the zipped version of ini file. |
1.3 MiB 6 May 2016 |
| TestModbus CD3000M / CD3200 Software Testing Kit for Modbus communication. To connect the unit at the PC, it's necessary use the programming cable connected between the PG connector and the serial port RS232 of the PC. The programming cable is not included. |
1.0 MiB 4 June 2014 |
-
- Size SR9 – H 121 x W 72 x D 185 – 1.15 Kg. Current Range 35-40A
-
- Size SR12 – H 269 x W 93 x D 170 – 3.4 Kg. Current Range 60-90A
-
- Size SR15 – H 273 x W 93 x D 170 – 3.6 Kg. Current Range 120-210A
-
- Size S9 – H 350 x W 116 x D 244 – 5.1 Kg. Current Range 280A
-
- Size S12 – H 520 x W 137 x D 270 – 15 Kg. Current Range 400-700A
REVO KP2
- Up to 6 zone can be managed
- 4.3, 7.0, 10” Colour Display
- Trend display
- Thyristor Configuration Recipy Management
- Multi Language Interface
- For REVO M, REVO CL, CD3000E and MULTIDRIVE.
TU-RS485-PB Profibus DP to Modbus RTU Converter
- Protocol Converter / Gateway from serial interface to PROFIBUS DP
- The PROTOCOL CONVERTER TU-RS485-PB connects devices such as thyristor units, controller and soft starter via their serial interfaces to Profibus DP. RS232, RS485 und RS422 interfaces are on Board as a standard feature.
TU-RS485-ETH-DL-IO Ethernet to Modbus Converter
- N.1 serial interface RS-485 Modbus RTU Master
- N.1 serial interface RS-485/232 Modbus RTU Slave
- USB Port with USB 8GB Memory Key for Data Logging
- Interface Ethernet 10Base-T, Modbus TCP
- N.4 Digital Inputs + N.2 SPDT Relays
- Functional Block programming software
CD-RS RS232 to RS485 RS422 Signal Converter 2500V Insulation
- Configurable communication
- RS485 or RS232RS232 front panel connector
- 2500V insulation between input and output
- Side by side mounting
- DIN rail mount or bulk head mounting
- Input and output data transfer LED indication