• Suitable for Normal Resistance load types
  • From 30A to 210A
  • Max. voltage 480V, 600Vac
  • Load type: Resistance
  • Inputs: Pt100, Thermo Couple, 0:10V, 4:20mA
  • Heather Break alarm options
  • Firing mode: Zero Crossing

General Details

REVO TC 1PH Temperature and Power Controller

  • Suitable for Normal Resistance load types
  • Current range – 30A, 35A, 40A, 60A, 90A, 120A, 150A, 180A, 210A
  • Supply voltage up to 480V, 600Vac
  • Microprocessor based electronic circuit fully isolated from the power
  • Thyristor Firing types include Zero Crossing Firing
  • Controller input signals from Thermocouple, PT100 (3 wire RTD), 4-20mA and 0-10V DC Linear
  • Up to 4 configurable Controller outputs (Relay, SSR and 4-20mA)
  • Heater Break (HB) alarm to diagnose partial or total load failure with automatic setting, relay alarm output and front LED indication. Available as an option
  • Internal quick-blow fuses as standard
  • RS485 comms (Modbus Protocol) as standard
  • Internal Current Transformer included as standard
  • Special design Heatsink with high dissipation value
  • IP20 protection
  • Complies with CE specification

REVO TC 1PH is a Compact Solution that Integrate Temperature and Power Controller in One Unit:

  • Single Loop PID Temperature controller
  • 1PH Thyristor Power Controle units
  • Current Transformers
  • Fuse-Holder

The final result is a cost saving in terms of space and cabling.
Cabinet with REVO TC

Manuals
NameSizeDate
ENG L M CD Revo TC -2PH 01

2.8 MiB 9 February 2016
ENG L M CD Revo TC -2PH 02

391.1 KiB 9 February 2016
ENG L M CD Revo TC01

3.0 MiB 17 July 2015
ENG L M CD Revo TC02

647.4 KiB 17 July 2015
Eng-Revo-TCM

1.0 MiB 22 July 2015
Eng-RevoTCM Part01

1.7 MiB 21 December 2015
Eng-RevoTCM Part02

470.7 KiB 21 December 2015
ITA L M CD Revo TC01

1.7 MiB 17 July 2015
ITA L M CD Revo TC02

551.7 KiB 17 July 2015
Datasheet
NameSizeDate
REVO TC 1PH

462.3 KiB 4 June 2014
REVO TC 2PH

611.6 KiB 4 June 2014
REVO TC 3PH

690.0 KiB 4 June 2014
REVO TCM

632.3 KiB 4 June 2014
Software

Revo-TC-Configurator

4.5 MiB 21 December 2015

Driver-USB-for-programming-cable

CCA Cable for unit configuration need a driver to be used on Windows PC. This is the executable version to install automatically the driver into the PC system.

2.0 MiB 6 May 2016

Driver-USB-for-programming-cable

CCA Cable for unit configuration need a driver to be used on Windows PC. This is the zipped version of ini file.

1.3 MiB 6 May 2016

TestModbus

CD3000M / CD3200 Software Testing Kit for Modbus communication. To connect the unit at the PC, it's necessary use the programming cable connected between the PG connector and the serial port RS232 of the PC. The programming cable is not included.

1.0 MiB 4 June 2014

Size & Dimensions
Informativa Privacy | Informativa Cookie | Impostazioni Cookie