REVO TC 3PH
- Suitable for Normal Resistance
- Three Phase 3PH (3-Leg) From 30A to 210A
- Max. voltage 480V, 600Vac
- Load type: Resistance
- Inputs: Pt100, Thermo Couple, 0:10V, 4:20mA
- Heather Break alarm options
- Firing mode: Zero Crossing
REVO TC 3PH
Temperature and Power Controller 3PH
Temperature and Power Controller 3PH is a compact unit integrating different elements: PID Temperature Controller, 3PH Thyristor Power Controler (SCR/SSR), Current Sensor, Fuse-Holder. Temperature and Power Controller Suitable for Normal Resistance load types.
- Current range – 30A, 35A, 40A, 60A, 90A, 120A, 150A, 180A, 210A
- Supply voltage up to 480V, 600Vac
- Microprocessor based electronic circuit fully isolated from the power
- Thyristor Firing types include Zero Crossing Firing
- Controller input signals from Thermocouple, PT100 (3 wire RTD), 4-20mA and 0-10V DC Linear
- Up to 4 configurable Controller outputs (Relay, SSR and 4-20mA)
- Heater Break (HB) alarm to diagnose partial or total load failure with automatic setting, relay alarm output and front LED indication. Available as an option
- Internal quick-blow fuses as standard
- RS485 comms (Modbus Protocol) as standard
- Internal Current Transformer included as standard
- Special design Heatsink with high dissipation value
- IP20 protection
- Complies with CE specification
REVO TC 3PH is a Compact Solution that Integrate Temperature and Power Controller in One Unit:
- Single Loop PID Temperature controller
- Three Phase 3PH Thyristor Power Control units
- Current Transformers
- Fuse-Holder
The final result is a cost saving in terms of space and cabling.
| Name | Size |
|---|
| Eng-RevoTC 30-40 3ph Part1 User's Manual Temperature Controller Revo TC 3ph - Part 1 | 2.9 MiB |
| Eng-RevoTC 30-40 3ph Part2 User's Manual Temperature Controller Revo TC 3ph - Part 2 | 0.9 MiB |
| Name | Size |
|---|
| REVO TC 3PH Datasheet REVO TC 3PH | 0.6 MiB |
| Revo-TC-Configurator REVO TC configuration software | 4.5 MiB |
| Driver-USB-for-programming-cable CCA Cable for unit configuration need a driver to be used on Windows PC. This is the executable version to install automatically the driver into the PC system. | 2.0 MiB |
| Driver-USB-for-programming-cable CCA Cable for unit configuration need a driver to be used on Windows PC. This is the zipped version of ini file. | 1.3 MiB |
Files di configurazione Modbus:
| Name | Size |
|---|
| PROFINET-Serial Communication RTC REVO TC PROFINET - Serial Communication Manual (TU-RS485-PNT0TCMxx) | 1.1 MiB |
| TU-RS485-Revo TC-zone Configurations Zone Configuration Files for TU-RS485-xxxxTCMxx | 19 KiB |
GSD and GSDM files for Profibus and Profinet:
| PROFIBUS-GSD-Files File GSD (General Station Description File) PROFIBUS configuration | 11 KiB |
| PROFINET-GSDML-Files File GSDML (General Station Description File) PROFINET configuration | 85 KiB |
- PIVA:IT08925720156 - Tribunale di Milano REA:1255303 - Capitale sociale:€ 26.000,00 - All Rights Reserved.