REVO E 3PH
| This Product is available only as SPARE PRODUCT |
| Substitute it with→ REVO C 3PH |
- From 35 up to 500A
- Max. voltage 480V or 600V AC as option
- Designed to drive resistive, transformer loads and MoSi2 Elements
- Inputs: SSR, 0:10V, 4:20mA, 10KPot and Communication Std.
- Firing mode: zero crossing, burst firing, single cycle, soft start + burst firing and phase angle + soft start
- N°1 Retransmission is available
REVO E 3PH
Thyristor Power Controller
| This Product is available only as |  |
| → REVO C 3PH |
REVO E 3PH Thyristor Power Controller is for Inductive Loads, including Resistance, Kanthal Super (MoSi2 Element) or SiC element on Secondary of Transformer, an Universal and Digital Unit based on configurable powerfull microprocessor. It is possible to configure all inputs, the firing mode and control mode for all load type.
- SCR Power Controller suitable for most applications including Short Wave Infrared (SWIR) & Inductive load types
- Current range – 35A, 45A, 75A, 100A, 125A, 150A, 225, 300A, 350A, 400A, 450A, 500A
- Three leg switching of 3/4 wire star or 3/6 wire delta loads
- Fully digital and user configurable for all inputs, firing modes, feedback modes and load types
- Firing modes include zero crossing (ZC), burst firing (BF), single cycle (SC), soft start + burst firing (S+BF) and phase angle + soft start (S+PA)
- Microprocessor based electronic circuit fully isolated from power
- Universal input signal with automatic zero/span calibration
- Power feedback or voltage compensation
- RS485 Comms MODBUS protocol as standardUnbalanced loadHeater break alarm to diagnose partial or total load failure and short circuit
- Control & monitor power, current & voltage via external keypad (CD-KP)
- IP20 Protection
| Name | Size |
|---|
| ENG L M CD REVO E-3PH 25-500A Manual REVO E 3PH from 25A to 500A (English Version) |
2.4 MiB |
| ENG L M CD REVO E-3PH 25-600A Basic Manual REVO E 3PH from 25A to 600A Basic (English Version) |
2.1 MiB |
| FRA L M CD REVO E-3PH 25-500A |
2.7 MiB |
| ITA L M CD REVO E-3PH 25-500A MANUALE D’USO REVOE-3PH Unita’ a Thyristor da 25A a 500A |
2.5 MiB |
| Name | Size |
|---|
| ThyristorConfigurator V5.7.1.5 Thyristor configurator sofwtare |
24.9 MiB |
| Driver-USB-for-programming-cable CCA Cable for unit configuration need a driver to be used on Windows PC. This is the executable version to install automatically the driver into the PC system. |
2.0 MiB |
| Driver-USB-for-programming-cable CCA Cable for unit configuration need a driver to be used on Windows PC. This is the zipped version of ini file. |
1.3 MiB |
-
- Size S9 – H 440 x W 137 x D 270
-
- Size S11 – H 440 x W 137 x D 270
-
- Size S13 – H 440/520 x W 262 x D 270
-
- Size S14 – H 520 x W 262 x D 270
REVO KP2
- Up to 6 zone can be managed
- 4.3, 7.0, 10” Colour Display
- Trend display
- Thyristor Configuration Recipy Management
- Multi Language Interface
- For REVO M, REVO CL, CD3000E and MULTIDRIVE.
CD KP Operating terminals for Thyristor Units
- Operating terminals for Thyristor Units
- N°2 Display
- 48x96 Front Panel
- Re-Transmission
- Thyristor Configuration Port
- Multi Language Interface
- For CD3000M, CD3200, CD3000E and MULTIDRIVE.
TU-RS485-PB Profibus DP to Modbus RTU Converter
- Protocol Converter / Gateway from serial interface to PROFIBUS DP
- The PROTOCOL CONVERTER TU-RS485-PB connects devices such as thyristor units, controller and soft starter via their serial interfaces to Profibus DP. RS232, RS485 und RS422 interfaces are on Board as a standard feature.
CD-RS RS232 to RS485 RS422 Signal Converter 2500V Insulation
- Configurable communication
- RS485 or RS232RS232 front panel connector
- 2500V insulation between input and output
- Side by side mounting
- DIN rail mount or bulk head mounting
- Input and output data transfer LED indication
TU-RS485-ETH-DL-IO Ethernet to Modbus Converter
- N.1 serial interface RS-485 Modbus RTU Master
- N.1 serial interface RS-485/232 Modbus RTU Slave
- USB Port with USB 8GB Memory Key for Data Logging
- Interface Ethernet 10Base-T, Modbus TCP
- N.4 Digital Inputs + N.2 SPDT Relays
- Functional Block programming software