Current range: 3,5A - 800A
Max Voltage:480V, 600V, 690V
Approvals: CE / UKCA / cUL US (option) / EAC
Load: Resistive

General Details



Single phase static relay

  • Revo S 1PH is a single-phase static relay, complete with heatsink, specifically designed to save space and work.
  • Current range – 30A, 35A, 40A, 60A, 90A, 120A, 150A, 180A, 210A, 300A, 400A, 500A, 600A, 700A, 800A
  • Voltage range 480V, 600V and 690V (starting from 60A), +/-10%
  • Fully isolated from the power
  • Zero crossing firing mode (ZC) or Burst Firing (4, 8 or 16 cycles selectable)
  • Load type: Resistance, IR Lamp long and medium waveform
  • Logic input signal 4 to 30V DC typical (SSR) plus 4-20mA or 0-10V DC Linear input as an option
  • Constant current drain, independent of supply voltage with SSR input
  • Heater Break (HB) alarm to diagnose partial or total load failure with automatic setting, relay alarm output and front LED indication. Available as an option
  • Side by side mounting
  • Special design Heatsink with high dissipation value
  • IP20 protection
  • Complies with EMC, EAC, cULus® 508 and cUL® us listed up to 700A as an option.
    UL® listed for 800A units.
  • Can be used in conjunction with REVO-PC to provide multi-zone control

REVO S 1PH – Order Code

REVO S 1PH – Size & Dimensions


REVO S 1PH – Documentation




ITA_REVO-S-1PH-30-40A-Solid-State-relayManuale d’uso REVO S 1PH da 30 a 40A (M-RS1-30-40)ITA
ITA_REVO-S-1PH-300-800-Solid-State-relayManuale d’uso REVO S 1PH da 300 a 800A (M-RS1-300-800)ITA
ITA_REVO-S-1PH-60-210A-Solid-State-relayManuale d’uso REVO S 1PH da 60 a 210A (M-RS1-60-210)ITA
ITA_REVO-S-1PH-60-800-690V-Solid-State-relayManuale d’uso REVO S 1PH da 60 a 800A, 690V (M-RS1-60-800-690V)ITA
ITA_REVO-S-IFH-1PH-30-40A-Solid-State-relayManuale d’uso REVO S 1PH IFH (fusibili interni) da 30 a 40A (M-RS1-IFH-30-40)ITA


ENG_REVO-S-1PH-30-40A-Solid-State-relayUser Manual REVO S 1PH from 30 to 40A (M-RS1-30-40)ENG
ENG_REVO-S-1PH-300-800-Solid-State-relayUser Manual REVO S 1PH from 300 to 800A (M-RS1-300-800)ENG
ENG_REVO-S-1PH-60-210A-Solid-State-relayUser Manual REVO S 1PH from 60 to 210A (M-RS1-60-210)ENG
ENG_REVO-S-1PH-60-800-690V-Solid-State-relayUser Manual REVO S 1PH from 60 to 800A, 690V (M-RS1-60-800-690V)ENG
ENG_REVO-S-IFH-1PH-30-40A-Solid-State-relayUser Manual REVO S 1PH IFH (Internal fuse) from 30 to 40A (M-RS1-IFH-30-40)ENG


FRA_REVO-S-1PH-30-40A-Solid-State-relayManuel d’utilisation REVO S 1PH de 30 à 40A (M-RS1-30-40)FRA
FRA_REVO-S-1PH-300-800-Solid-State-relayManuel d’utilisation REVO S 1PH de 300 à 800A (M-RS1-300-800)FRA
FRA_REVO-S-1PH-60-210A-Solid-State-relayManuel d’utilisation REVO S 1PH de 60 à 210A (M-RS2-60-210)FRA
FRA_REVO-S-1PH-60-800-690V-Solid-State-relayManuel d’utilisation REVO S 1PH de 60 à 800A, 690V (M-RS1-60-800-690V)FRA
FRA_REVO-S-IFH-1PH-30-40A-Solid-State-relayManuel d’utilisation REVO S 1PH IFH (fusible interne) de 30 à 40A (M-RS1-IFH-30-40)FRA


GER_REVO-S-1PH-30-40A-Solid-State-relayHandbuch REVO S 1PH von 30 bis 40A (M-RS1-30-40)GER
GER_REVO-S-1PH-300-800-Solid-State-relayHandbuch REVO S 1PH von 300 bis 800A (M-RS1-300-800)GER
GER_REVO-S-1PH-60-210A-Solid-State-relayHandbuch REVO S 1PH von 60 bis 210A (M-RS1-60-210)GER
GER_REVO-S-1PH-60-800-690V-Solid-State-relayHandbuch REVO S 1PH von 60 bis 800A, 690V (M-RS1-60-800-690V)GER
GER_REVO-S-IFH-1PH-30-40A-Solid-State-relayHandbuch REVO S 1PH IFH (interne Sicherung) von 30 bis 40A (M-RS1-IFH-30-40)GER

3D Models

Size: SR3
Size: SR6
Size: SR12
Size: SR15
Size: S11
Size: S12
Size: S15

Copyright © 2010 - 2024 | CD Automation S.r.l. - Via Pablo Picasso 34/36, Legnano, MI - Tel: +39 0331 577479 - Fax: +39 0331 579479 - - PIVA:IT08925720156 - Tribunale di Milano REA:1255303 - Capitale sociale:€ 26.000,00 - All Rights Reserved.