REVO M 1PH
- From 30 up to 700A
- Max. voltage 480V or 600V AC as option
- (690V available on units > 280A)
- Load type: Resistance, IR Lamp short waveform and SiC element.
- Inputs: SSR, 0:10V, 4:20mA, 10KPot and Communication Std.
- Heather Break is available as an option.
- Firing mode: Burst Firing as standard
REVO M 2PH
Thyristor Power Controller 2 legs
- Thyristors suitable for Normal Resistance, Medium & Long Wave IR, and Silicon Carbide load types
- Current range – 30A, 35A, 40A, 60A, 90A, 120A, 150A, 180A, 210A, 280A, 400A, 450A, 500A, 600A, 700A
- Supply voltage up to 480V, 600V (690V available on units => 400A)
- Microprocessor based electronic circuit fully isolated from the power
- Firing types include Zero Crossing, Burst Firing
- Input signals from DC Logic (SSR), 4-20mA, 0-10V DC Linear input, 10K Pot or RS485 comms
- Selectable control modes include V & VxI
- Heater Break (HB) alarm to diagnose partial or total load failure with automatic setting, relay alarm output and front LED indication.
- Available as an option
- Digital inputs configurable via front panel keypad
- Internal quick-blow fuses as standard
- RS485 comms (Modbus Protocol) as standard
- Internal Current Transformer included as standard
- Special design Heatsink with high dissipation value
- IP20 protection
- Complies with CE specification, cUL pending
| Name | Size |
|---|
| ENG L M CD REVO M-280-700-2PH USER'S MANUAL Revo M 2PH from 280A to 700A (English Version) |
3.6 MiB |
| ENG L M CD REVO M-30-40-2PH USER'S MANUAL Revo M 2PH from 30A to 40A (English Version) |
3.8 MiB |
| ENG L M CD REVO M-60-210-2PH USER'S MANUAL Revo M 2PH from 60A to 210A (English Manual) |
2.7 MiB |
| GER L M CD REVO M-280-700-2PH Bediener Handbuch Revo M 2Ph Digitaler Thyristorsteller 280A ÷ 700A |
2.1 MiB |
| GER L M CD REVO M-30-40-2PH Bediener Handbuch Revo M 2PH Digitaler Thyristorsteller 30A ÷ 40A |
1.6 MiB |
| GER L M CD REVO M-60-210-2PH Bediener Handbuch Revo M 2PH Digitaler Thyristorsteller 60A ÷ 210A |
1.5 MiB |
| ITA L M CD REVO M-280-700-2PH MANUALE D'USO Revo M 2Ph Da 280A a 700A (Versione Italiano) |
3.8 MiB |
| ITA L M CD REVO M-30-40-2PH MANUALE D'USO Revo M 2 PH da 35A a 40A (Versione Italiano) |
4.0 MiB |
| ITA L M CD REVO M-60-210-2PH MANUALE D'USO Revo M 2PH da 60A a 210A (Versione Italiano) |
2.8 MiB |
| Name | Size |
|---|
| Serial Communication CD3000E-REVOE USER'S MANUAL CD3000 E - REVO E Serial Communication (English Version) |
1.2 MiB |
| Serial Communication Multidrive MULTIDRIVE Serial Communication Manual (English Version) |
1.4 MiB |
| Serial Communication REVO-CL REVO CL Serial MODBUS Communication Manual (English Version) |
1.1 MiB |
| Serial Communication REVO-M REVO M Serial MODBUS Communication Manual (English Version) |
1.2 MiB |
| Name | Size |
|---|
| ENG REVO M 2PH 280 To 700 DATASHEET REVO M-2PH from 280A to 700A Universal 2 Phase Thyristor Unit (English Version) |
0.4 MiB |
| ENG REVO M 2PH 60 To 210 DATASHEET REVO M-2PH from 60A to 210A Universal 2 Phase Thyristor Unit (English Version) |
0.3 MiB |
| Driver-USB-for-programming-cable CCA Cable for unit configuration need a driver to be used on Windows PC. This is the executable version to install automatically the driver into the PC system. |
2.0 MiB |
| Driver-USB-for-programming-cable CCA Cable for unit configuration need a driver to be used on Windows PC. This is the zipped version of ini file. |
1.3 MiB |
-
- Size SR10 – H 121 x W 108 x D 185 – 1.76 Kg. Current Range 30-40A
-
- Size SR13 – H 269 x W 186 x D 170 – 6.8 Kg. Current Range 60-90A
-
- Size SR16 – H 273 x W 186 x D 170 – 7 Kg. Current Range 120-210A
-
- Size S10 – H 350 x W 240 x D 244 – 11 Kg. Current Range 280A
-
- Size S13/S14 – H 440/520 x W 262 x D 270 – 18 Kg.
REVO KP2
- Up to 6 zone can be managed
- 4.3, 7.0, 10” Colour Display
- Trend display
- Thyristor Configuration Recipy Management
- Multi Language Interface
- For REVO M, REVO CL, CD3000E and MULTIDRIVE.
TU-RS485-PB Profibus DP to Modbus RTU Converter
- Protocol Converter / Gateway from serial interface to PROFIBUS DP
- The PROTOCOL CONVERTER TU-RS485-PB connects devices such as thyristor units, controller and soft starter via their serial interfaces to Profibus DP. RS232, RS485 und RS422 interfaces are on Board as a standard feature.
TU-RS485-ETH-DL-IO Ethernet to Modbus Converter
- N.1 serial interface RS-485 Modbus RTU Master
- N.1 serial interface RS-485/232 Modbus RTU Slave
- USB Port with USB 8GB Memory Key for Data Logging
- Interface Ethernet 10Base-T, Modbus TCP
- N.4 Digital Inputs + N.2 SPDT Relays
- Functional Block programming software
CD-RS RS232 to RS485 RS422 Signal Converter 2500V Insulation
- Configurable communication
- RS485 or RS232RS232 front panel connector
- 2500V insulation between input and output
- Side by side mounting
- DIN rail mount or bulk head mounting
- Input and output data transfer LED indication