| Phases: | 3 |
| Type: | Power controller |
| Current Range: | 30A - 210A |
| Max Voltage: | 480V, 600V |
| Communication: | Modbus |
| Approvals: | CE / UKCA / EAC |
| Load: | Resistive / Inductive / IRSW / MoSi2 / SiC |
REVEX 3PH
The REVO on demand – Innovation in Power Control
REVEX 3PH is a fully configurable three phases power controller. If you don’t need features, delete them, so you’ll get an immediate cut on the cost of the unit.
- Inputs: 4:20mA, 0:10V, SSR and ModBus as std.
- Load type: Normal Resistance, Infrared Short, Medium and Long Waveform
- Firing mode: Burst Firing, Zero Crossing
- Control Mode: Voltage, Current and Power or V2 and I2 with additional Transfer to VxI
- Communication RS485 with Modbus® protocol std.
- Two Analog input
- Two Digital input
- USB: Port integrated for configuration in safety mode (No Load and Auxiliary Voltage needed) Unit Powered Through USB
- With the units already programmed you can simply switch On and Go
- Approvals: Comply with CE+EMC / EAC
- Dual Current Limit: For peak and RMS value
Option
- All options are shown below with the relevant model code
- HB Alarm to diagnose partial or Total Load Failure and Thyristor Short Circuit
REVEX 3PH – Choose an Option to save money !!!
Select an option to eliminate what you don’t need. Build your cheaper solution selecting one of the following options !
Note:
N option you want removed
Y It serves my project
(*1) Full price includes Fuses on all sizes with exclusion of 30-35-40A units
REVEX THE POWER CONTROLLER ON DEMAND
REVEX offers total software and hardware flexibility
Available in a multitude of configurations:
• 16 different Modes for 1 Phase Units
• 8 different modes for 2 and 3 Phase Units
REVEX: superb flexibility in software and hardware
• Build your unit in line with Process Demand
• Typical examples shown below
• Field Bus available
• Modbus communication as standard
1 Phase Power Control units in 30, 35 & 40A sizes with and without front panel display.
Version without display can be programmed via the USB port.
Shown are 1, 2 or 3 Phase Power Control units in 60 and 90A sizes.
Available with or without fuses on the 60A and 90A units.
REVEX 3PH – Order Code
REVEX 3PH – Size & Dimensions
Now available Siemens TIA Portal Libraries. Click here for more info.
*only for RS485 connection
Free Software to configure REVEX Unit:
The configuration is done via a normal USB 2.0 cable – male A type to male Micro-B (Order code if you buy it from us: USBMA-20-USBMMB) and through a free configuration software available at the link below.
The USB port on the front of the unit allows the configuration of REVEX in a simple and safe way since the unit is powered by the USB port itself (load and auxiliary voltage not necessary).
Software:
| FILE NAME | DESCRIPTION | Link |
|---|---|---|
| Thyristor Configurator 6.0.6.4 | Thyristor Configurator Software REVEX 1/2/3PH, REVEX PA, REVO C 1/2/3PH, REVO PC v2, REVO PN v2, REVO PB, REVO RT/RTL, COMPACT, REVO TH |
Communication Manuals:
| DESCRIPTION | Link |
|---|---|
| TU-RS485-PDP_RVX14 – Addendum: REVEX Profibus for 14 Thyristor units Manual | |
| TU-RS485-PNTxRVXxx – Addendum: REVEX Profinet for 14 Thyristor units Manual | |
| Manual for REVEX Serial Communication |
PLC Files:
Please select the Communication Module
FAST TUNE
The all new powerful Thyristor Configurator Software allows
you to configure all CD Automation products quickly and easily by using the FAST MODE. Simply select your application and the load type picture appears automatically, providing a list of suggested parameter settings. Depending on your application requirements, you can accept or make manual adjustments and when ready, download direct to the thyristor unit.
TEST UNIT
The TEST page is very useful when installing & commissioning
CD Automation products as well as finding process issues or fine tuning at a later stage. You can read, write, enable and disable key values and parameters to test your load. Examples include; reading voltage, current and power values, or current limit status, changing input types between analog or SSR, control (feedback) modes V, I and VxI, or select firing types half cycle, single cycle, burst firing, delayed triggering, phase angle and soft start. The new ‘Load Analyzer’ (a small oscilloscope) can be activated from this page, see below.
LOAD ANALIZER
Provides real-time information of the output waveform, where
you can select up to 10 process variables to help the operator determine if the waveform is in line with process expectations. Also useful for trouble shooting.
PROCESS VARIABLE LOGGING
The logging intervals are a fix value with non-programmable intervals.
REVEX 3PH – Documentation
Catalog
Manuals
Italiano
| NOME FILE | DESCRIZIONE | LINGUA | Link |
|---|---|---|---|
| Ita-REVEX-3PH-120-210A | Manuale d’uso REVEX 3PH da 120 a 210A (M-RX3-120-210) | ITA | |
| Ita-REVEX-3PH-30-40A | Manuale d’uso REVEX 3PH da 30 a 40A (M-RX3-30-40) | ITA | |
| Ita-REVEX-3PH-60-90A | Manuale d’uso REVEX 3PH da 60 a 90A (M-RX3-60-90) | ITA | |
| Ita-REVEX-3PH-60-90A-2019 | Manuale d’uso Vecchia Versione 2019 – REVEX 3PH da 60 a 90A (M-RX3-60-90-2019) | ITA, OLD |
English
| FILE NAME | DESCRIPTION | LANGUAGE | Link |
|---|---|---|---|
| Eng-REVEX-3PH-120-210A | User Manual REVEX 3PH from 120 to 210A (M-RX3-120-210) | ENG | |
| Eng-REVEX-3PH-30-40A | User Manual REVEX 3PH from 30 to 40A (M-RX3-30-40) | ENG | |
| Eng-REVEX-3PH-60-90A | User Manual REVEX 3PH from 60 to 90A (M-RX3-60-90) | ENG | |
| Eng-REVEX-3PH-60-90A-2019 | User Manual Old Version 2019 – REVEX 3PH from 60 to 90A (M-RX3-60-90-2019) | ENG, OLD |
Français
| NOM DE FICHIER | DESCRIPTION | LANGUE | Link |
|---|
Deutsch
| DATEINAME | BESCHREIBUNG | SPRACHE | Link |
|---|---|---|---|
| GER-REVEX-3PH-120-210A | Handbuch REVEX 3PH von 120 bis 210A (M-RX3-120-210) | GER | |
| GER-REVEX-3PH-30-40A | Handbuch REVEX 3PH von 30 bis 40A (M-RX3-30-40) | GER | |
| GER-REVEX-3PH-60-90A | Handbuch REVEX 3PH von 60 bis 90A (M-RX3-60-90) | GER |
3D Models
Size: SR10
Size: SR17
Size: SR25
Size: SR26 (only REVEX 3ph 2019 version)