MoSi2 Element

MoSi2 ELEMENT – SELECT YOUR LOAD CONNECTION:

MoSi2 Element 1PH Load

MoSi2 Element 1PH Load

Select

MoSi2 Element 1PH Load

MoSi2 Element 1PH Load

Select

MoSi2 Element Delta Star No Neutral, Star with Neutral, With or Without 3PH Transformer

Delta/Star No Neutral,Star+Neutral, With/Without 3PH Transf

Select

MoSi2 Element Delta Star No Neutral, Star with Neutral, With or Without 3PH Transformer

Delta/Star No Neutral,Star+Neutral, With/Without 3PH Transf

Select

MoSi2 Element Delta Star No Neutral, Star with Neutral, With or Without 3PH Transformer

Delta/Star No Neutral,Star+Neutral, With/Without 3PH Transf

Select

 

MoSi2 HEATING ELEMENT
( Kanthal Super Elements TM* )
  • This kind of heaters increase resistivity sharply with temperature.
  • The graph in this page show that at ambient temperature the resistance value is very low and increase its value up to 10 times.
  • To don’t oversize in current the Thyristor unit it’s necessary to limit the current to the load reducing the voltage with phase angle firing and current limit.
  • When the resistance value reach a setted value are possible two types of working method that can be selected from HMI:– Phase Angle plus current limit all the time long Or– Phase Angle plus current limit when the resistance is cold and transfering to Delayed Triggering if load is coupled with transformer.

 
 
*Brand Property of Sandvik Corporation

Kanthal-Super-mosi2-elements

Documentation
ENG KANTHAL
ENG KANTHAL
ENG_KANTHAL.pdf
0.3 MiB
754 Downloads
Details
CD AppNotes Eng Application Notes - Kanthal Super Molibdenum
CD AppNotes Eng Application Notes - Kanthal Super Molibdenum
CD_AppNotes_eng_Application notes_-_Kanthal_Super_Molibdenum.pdf
2.6 MiB
1078 Downloads
Details
CD AppNotes Eng Application Notes - Rev2
CD AppNotes Eng Application Notes - Rev2
CD_AppNotes_eng_Application Notes_-_Rev2.pdf
0.6 MiB
1508 Downloads
Details

Navigate inside the other application note:

REVO C 1PH – Revo Connect Universal SCR Power Controller Single Phase

Schema di collegamento del REVO C monofase

  • Phases: 1
  • Current Range form 30 to 800A.
  • Voltage Range 480V , 600V and 690V .
  • Inputs: 4:20mA , 0:10V, SSR and ModBus as std and different Field Bus Listed in the Product Coding
  • Firing mode: Half Cycle,Single Cycle,Burst Firing,Delayed Triggering, Phase Angle with or without Soft Start
  • Control Mode: Voltage,Current and Power or V2 and I2 with additional Transfer to VxI
  • USB: port integrated for configuration in safety mode (No Load and Auxiliary Voltage needed) Unit Powered Through USB
  • 100 KA: Short Circuit Current rating (SCCR) up to 600V
  • cUL and CE + EMC approved

REVO C 2PH – Revo Connect Universal SCR Power Controller Two Phases

Schema di collegamento del REVO C bifase

  • Phases: 2
  • Current Range from 30 to 800A.
  • Range di tensione 480V , 600V & 690V.
  • Inputs: 4:20mA , 0:10V, SSR and ModBus as std and different Field Bus Listed in the Product Coding
  • Load type: Normal Resistance,Infrared Short,Medium and Long,Transformar Primary using Delayed Triggering
  • Inputs: 4:20mA , 0:10V, SSR and ModBus as std and different Field Bus Listed in the Product Coding
  • Firing mode: Burst Firing , Zero Crossing.
  • USB: port integrated for configuration in safety mode (No Load and Auxiliary Voltage needed) Unit Powered Through USB
  • 100 KA: Short Circuit Current rating (SCCR) up to 600V
  • cUL and CE + EMC approved

REVO C 3PH – Revo Connect Universal SCR Power Controller Three Phases

Schema di collegamento del REVO C trifase

  • Phases: 3
  • Current Range form 30 to 800A.
  • Voltage Range 480V , 600V and 690V.
  • Inputs: 4:20mA , 0:10V, SSR and ModBus as std and different Field Bus Listed in the Product Coding
  • Firing mode:Burst Firing , Delayed Triggering and Phase Angle with or without Soft Start
  • Control Mode: Voltage,Current and Power or V2 and I2 with additional Transfer to VxI
  • USB: port integrated for configuration in safety mode (No Load and Auxiliary Voltage needed) Unit Powered Through USB
  • 100 KA: Short Circuit Current rating (SCCR) up to 600V
  • cUL and CE + EMC approved

MoSi2 Element 1PH Load


This kind of heaters, MoSi2 Element ( Kanthal Super Elements TM* ), increase resistivity sharply with temperature. The value of the resistance at ambient temperature is very low and increase its value up to 10 times as a function of temperature. To don’t oversize in current the Thyristor unit it’s necessary to limit the current to the load reducing the voltage with phase angle firing and current limit. When the resistance value reach a setted value are possible two types of working method that can be selected from HMI:- Phase Angle plus current limit all the time long Or- Phase Angle plus current limit when the resistance is cold and transfering to Delayed Triggering if load is coupled with transformer. CD Automation can drive this kind of elements with REVO CL and Multidrive 1ph Units.

Copyright © 2010 Cd Automation S.r.l. - Via P.Picasso 34/36, Legnano, MI - Tel: +39 0331 577479 - Fax: +39 0331 579479 - - PIVA:IT08925720156 - Tribunale di Milano REA:1255303 - Capitale sociale:€ 26.000,00 - All Rights Reserved.
ASK FOR INFORMATION AND QUOTATION
| Informativa Privacy | Informativa Cookie |
Diritti Interessati | Impostazioni Cookie |